(v12.0.9036.21357 started 2024-10-09 03:18:43 on VM2)
Switch EPMAP to support RPC endpoint mapper: - parameter type ist optional, only supported value is MSX, then only following Exchange RPC Interfaces are allowed: ... Exchange Server STORE EMSMDB Interface {A4F1DB00-CA47-1067-B31F-00DD010662DA} ... MS Exchange Directory RFR {1544F5E0-613C-11D1-93DF-00C04FD7BD09} ... MS Exchange Directory NSPI Proxy {F5CC5A18-4264-101A-8C59-08002B2F8426} - logs port within endpoint mapper response (if switch LOG is specified: logs full response in hex representation) - dynamic port listening depending on response of RPC endpoint mapper (ports will be displayed in orange within routing table) - listening of these ports will be stopped when routing table is reloaded Prerequisite: GatewayPort must be 135, DestinationPort must be * Remark: In case AppGw cannot listen on port 135: Firewall on inbound side should map port 135 to port 134, AppGw has to listen on port 134 and automatically corrects destination to port 135, DestinationPort must be *