ApplicGate
(v12.0.9380.41900 started 2025-09-06 21:32:43 on VM2)

Secondary destination address and load balancing:

A secondary destination address (IP address or DNS name, separated by ,) may be specified in field DestinationIP within routing table.
Not vaild for PRX, SAPR and UUDEST.
Examples: 129.10.1.2,129.11.2.5 or host.x.net,host2.x.net
If the connection to the first address fails, an attempt to connect to the secondary address will be made.
To speed up the second connection attempt the connect timeout keyword may be used, e.g. CNT:8

If the secondary address is ">DNS":
If the first destination address is a DNS name and resolves to a second address: The second address will be used as secondary address.

The keyword LDB is used for load balancing:
At any connection attempt the primary and secondary address will be switched. Not to be used with secondary address ">DNS"

Note for autologon routing entries:
- Any secondary addresses and ">DNS" are supported.
- The keyword LDB is not supported.
- For VPN Clients:
-- When using a secondary address the keyword "CNT:6" (connect timeout 6 seconds) is generated automatically.
-- If a proxy is defined: A secondary address is not supported.

ApplicGate Logo  reinhold.leitner@applicgate.com (C) September 2025
www.applicgate.com